MS-H220-V3/MSH220-V5 LCD Digital Heating Magnetic Stirring Bath

High borosilicate glass liner, resistant to sudden changes from hot to cold without breaking, transparent glass window for monitoring reaction product changes; stainless steel base, rust-resistant, easy to clean; high-temperature
resistant protective outer shell to prevent direct contact with hot glass and burns.
Dual-use stirring bath for water and oil, with secondary stirring in the bath pot. The stirring of the bath liquid simultaneously stirs the liquid sample in the flask, ensuring uniform heating of both bath liquid and sample.
Safety lock to prevent accidental changes in operational status.
Buzzer: A “beep beep beep” alert sounds when the countdown timer function ends. Button tone.
Features a timer function with a range of 1 min to 99h59min. It stops heating when the countdown ends but continues stirring to prevent heat damage to the sample.
Touch buttons with audible prompts.
Working status indicator light: Green during operation, flashing green before reaching set temperature; alarm red.
Reversible function.
Protection features: dry burning protection, overcurrent protection, ground fault protection, and over temperature protection.
Residual heat warning function. When the plate temperature is above 50℃ , heating is turned off, and the screen flashes “HOT” as a reminder of the high temperature even after the power is off.
Two independent safety circuits continuously monitor the device. In case of overheating, sensor failure, or circuit short, the machine will error report and stop heating or automatically cut off power to ensure operator safety.
DC brushless motor, spark-free, long life; low noise, maintenance-free, stable operation.
LCD displays speed, time, and temperature parameters clearly and intuitively.

PRODUCT PARAMETERS

Work plate Dimension: Ø220×105mm
Work plate material: High borosilicate glass + stainless steel base
Max. stirring quantity [H2O]: 3L
Speed range: 100~1500rpm，±10rpm
Speed display: LCD
Temperature display: LCD
Heating temperature range: Room Temp.-220℃
Temperature control accuracy: ±1℃
Temperature display accuracy: 0.1℃
“Hot” warning: 50℃
Overheating temperature protection: 350℃
Motor type: Brushless DC motor
Stirring positions: 1
Max. magnetic bar length: 40mm
Timer function: 1min-99h59min
Protection class: IP21
Motor rating output: 20W
Power: 900W
Heating output: 850W
Voltage,Frequency: 100-120V,60Hz; 200-240V,50Hz
Dimension [WxDxH]: 343×215×283mm
Weight: 6.0kg
Permissible ambient temperature: 5-40℃
Permissible ambient humidity: 80%RH